Plot map

Where each one rests

We’re mapping every grave inside the fence, so each one can be numbered, linked to its story, and properly marked. Each grave is measured with a tape from the fence corners. The GPS position of each grave is kept for trustees and registered family; the Texas Historical Commission’s atlas shows where the cemetery itself is.[2]

Drawing of the fenced cemetery, roughly 80 by 150 feet, with 0 graves placed so far. The table below lists every plot. A B C D Graves will appear here once the survey is done 10 feet
The fenced cemetery, roughly 80 by 150 feet.[1] The Texas Historical Commission atlas lists it as about 75 by 100 feet. Corner A is where the survey starts. Grid lines are 10 feet apart.

Waiting to be placed

All 11 people named in the cemetery record are waiting to be placed on the map. For most of them, no marker with their name has been recorded, so a family memory of where they lie would help.

How we’ll measure

  1. Mark each grave with a numbered flag, including every fieldstone and sunken spot.
  2. Measure from two fence corners to each grave with a tape. That puts every grave on this map to within a foot or so.
  3. Photograph each grave with its number on a card in the picture.
  4. Record the condition of each stone, so the trustees know what needs care.

Phone GPS is only accurate to 10 or 15 feet, and graves can be about 3 feet apart, so the tape is what places each grave here. Any GPS readings taken that day are kept private, for trustees and registered family.

Do you remember where someone is buried, or have an old sketch of the plots? We’d love to hear from you.